pipe question

On 26 Jan 2004 17:47:24 GMT, dsparkx2 RemoveThis @aol.com (Dave Sparkman) wrote:

 >
 >I would say not, I am basing this on looking through parts catalogs of
 >Chapparal and Dennis Kirk. They show two different part numbers for those two
 >years of bikes and on bikes that have no change they show the same part number.
 >For instance it is showing the same part number for 92-93 KX250, then a
 >differnt one for 94 KX then another part number for 95-97 KX.

Sometimes the changes are subtle, say, the diameter of the fat part of
the pipe is different .5mm or anything like that, but the overall
lenght and the fittings are the same. Just a guess...They could fit
fine, but I wouldn't advise buying them... If you can borrow one from
any of your buddies...

Just a thought......
The exhaust valve of my NX200 is the same as of the intake valve of
the CG125, they are exactly the same valve, no visual differences.
Actually, I've been using the CG125 intake valve instead of the
original exhaust valve for two years, no problems at all... Same thing
goes to the clutch disks... And the part numbers are completely
different...

 >-Dave-
 >YZ 125
 >WR 200
 >TSCEC # 432
 >RMEC # 3030


--
Tiago Rocha
Recife - Brasil
<a style='text-decoration: underline;' href="http://www.diariodastrilhas.cjb.net" target="_blank">www.diariodastrilhas.cjb.net</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: pipe question