Welcome to MotorcycleForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

gsxr 750

 
   Motorcycle Magazine (Home) -> Tech RSS
Next:  drill exhaust question  
Author Message
dumbass biker

External


Since: Sep 12, 2006
Posts: 1



(Msg. 1) Posted: Tue Sep 12, 2006 3:18 pm
Post subject: gsxr 750
Archived from groups: rec>motorcycles>tech (more info?)

Have a GSXR 750 it will fire and run as long as the start button is
pushed. When the starter button is released it shuts down. Any ideas

 >> Stay informed about: gsxr 750 
Back to top
Login to vote
B-12

External


Since: Aug 17, 2006
Posts: 87



(Msg. 2) Posted: Tue Sep 12, 2006 8:04 pm
Post subject: Re: gsxr 750 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

dumbass biker wrote:
> Have a GSXR 750 it will fire and run as long as the start button is
> pushed. When the starter button is released it shuts down. Any ideas

Dirty carburetors. Clean 'em out with B-12 as previously mentioned
about a bazillion times.

 >> Stay informed about: gsxr 750 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
dead gsxr 750 (1988) - hello, a friend of mine has this 1988 gsxr 750 and it won't start the cycle shop said it would cost $600.00 to fix it so he took it home. supposedly it was the cdi ? he put the part in then it had spark but his battery went dead and so he jumped it wit...

98 GSXR Ignition Problem - I have a 1998 GSXR and it refuses to fire. There is NO spark at the plugs. Brand new plugs. I checked the voltage, battery is 11.6V, the voltage from the signal generator is NOT .4V as the manual says. It is like .03V at one connector and .16V at the..

LF Kawasaki(or gsxr) Forks/wheels - I am looking for the following used items, ZX7/9/10/12R inverted forks with triples. Set of ZX7/9/10/12R wheels, colour unimportant, must have cush drive and discs. Would also consider GSXR parts if I could get the whole setup, i.e. wheels and forks. If...

gsxr -- swap 2001 gauge to a 1998 bike? - anyone done this? it seems the only wiring difference is a "constant 12v" to keep the clock memory; other than that; it's just pin differences. I swapped the pins around; but had two problems. 1) the fuel light remained on 2) the FI light cam...

gsxr front sprocket replacement - my manual does not cover replacing the front sprocket on my 1100 gsxr. does anyone have experience in changing it. it looks like I have to remove the hydraulic clutch line. thanks
   Motorcycle Magazine (Home) -> Tech All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]