(Msg. 1) Posted: Wed Dec 08, 2010 11:28 am
Post subject: clutch
Need help
I want to change my FZR1000EXUP clutch to cable and need info pic's etc
would like to make my own parts as have access to MC shop but need basic measurements/drawings/pics.
I have spent hours looking on net but not much help
wet clutch - Recently did new springs on an old Bultaco (75) clutch. The clutch discs in this particular application are all metal, not half metal & half fiber. The thing was slipping so the supplier told me to replace the springs & fill it with ATF as oppose...
Yes, it was the clutch switch! - After I replaced my clutch perch, I found that I could only start the bike in neutral. Thanks to folks here that had replied to my questions, and some work with an ohmmeter, I discovered that I had not fully seated the clutch switch in the perch. A few....
Hydraulic Clutch - My friend rides a Yamaha 600 Radion (really old bike) but she loves it to bits, unfortunately arthritis/carpal tunnel syndrome/something else (doctors aren't too sure what) in her wrist is causing problems with the weight of the clutch lever. So changing...
Stiff Clutch - I just went to look at a used 1979 GS850 Suzuki, amazingly nice condtion, but the clutch was very stiff, took a lot of strength to pull in and keep it in, I'd say about 15 or 20 pounds of force. Any idea what might cause this? Also, it was really hard to...
Clicking clutch - Hi The bike is Suzuki GSX750FY (2000 model). The katana in the US I believe. After recently changing my chain and sprockets I now have a clicking noise from the clutch. It comes from the bottom end under the engine cover. Whilst I had the cover off to...
You can post new topics in this forum You can reply to topics in this forum You can edit your posts in this forum You can delete your posts in this forum You can vote in polls in this forum
FAQ
Search
Profile
Private Messages
Log in
