Welcome to MotorcycleForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

FOAK: Ram

 
Goto page 1, 2
   Motorcycle Magazine (Home) -> UK RSS
Next:  Thicker Fork Oil Available Or?  
Author Message
Buzby

External


Since: Jan 23, 2004
Posts: 238



(Msg. 1) Posted: Thu Feb 03, 2005 6:40 am
Post subject: FOAK: Ram
Archived from groups: uk>rec>motorcycles (more info?)

I want to stuff some more ram in the pc. However, I'm confused [1].

I've got (according to CPU-Z utility) PC800 (400mhz) RDRam - I've had a look
round and can't seem to match this up with any of the techno babble on
offer - what should I be looking for?

TA!

Buzby

[1] not difficult to do

 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Loz H1

External


Since: Jul 03, 2004
Posts: 76



(Msg. 2) Posted: Thu Feb 03, 2005 6:40 am
Post subject: Re: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Buzby <gb.TakeThisOut@pumpupthe.net> spewed forth the following...

 > I want to stuff some more ram in the pc. However, I'm confused [1].
 >
 > I've got (according to CPU-Z utility) PC800 (400mhz) RDRam - I've had
 > a look round and can't seem to match this up with any of the techno
 > babble on offer - what should I be looking for?
 >
 > TA!
 >
 > Buzby
 >
 > [1] not difficult to do


RAMBUS/RIMM memory. Not the cheapest stuff around either. This place is
probably cheaper than most however..

<a style='text-decoration: underline;' href="http://www.scan.co.uk/Products/Products.ASP?CatID=22&FilterCategories=206&Thumbnails=yes" target="_blank">http://www.scan.co.uk/Products/Products.ASP?CatID=22&FilterCategories=...&Thumbn</a>

Based in Horwich, near Bolton if you live nearby.


--
Loz H
~ Hairy, Ugly and Fat ~
CB550F CB200<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
doesnotcompute3

External


Since: Dec 03, 2004
Posts: 139



(Msg. 3) Posted: Thu Feb 03, 2005 6:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Buzby said:

 >I want to stuff some more ram <snip>

Baaad idea.

--
Dnc<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Buzby

External


Since: Jan 23, 2004
Posts: 238



(Msg. 4) Posted: Thu Feb 03, 2005 7:40 am
Post subject: Re: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

  >> I want to stuff some more ram in the pc. However, I'm confused [1].
  >>
  >> I've got (according to CPU-Z utility) PC800 (400mhz) RDRam - I've had
  >> a look round and can't seem to match this up with any of the techno
  >> babble on offer - what should I be looking for?

 > RAMBUS/RIMM memory. Not the cheapest stuff around either. This place is
 > probably cheaper than most however..
 >
<font color=purple> > <a style='text-decoration: underline;' href="http://www.scan.co.uk/Products/Products.ASP?CatID=22&FilterCategories=206&Thumbnails=yes</font" target="_blank">http://www.scan.co.uk/Products/Products.ASP?CatID=22&FilterCategories=...&Thumbn</a>>

Thanks Loz - much appreciated!<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
see_sig

External


Since: Nov 09, 2004
Posts: 169



(Msg. 5) Posted: Thu Feb 03, 2005 7:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"Doesnotcompute" <doesnotcompute RemoveThis @DELETETHISgmail.com> wrote in message
news:f39a986a7a683acba71f168efc5febb3@localhost.talkaboutmotorcycles.com...
 > Buzby said:
 >
  >>I want to stuff some more ram <snip>
 >
 > Baaad idea.

<sheepish grin>

--
Monz
Suzuki GSXR1000Z
[insert nickname here]@gsxr1000.co.uk
ANORAK#16 | BOTAFOT #135 | BREast#2 | MIRTTH#25 | BoB#16<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Whinging Courier

External


Since: May 07, 2004
Posts: 2448



(Msg. 6) Posted: Thu Feb 03, 2005 7:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

this post is not archived.
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Preston Kemp2

External


Since: Sep 08, 2004
Posts: 215



(Msg. 7) Posted: Thu Feb 03, 2005 7:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Whinging Courier wrote:

 > In uk.rec.motorcycles, Monz wrote:
 >
  > > "Doesnotcompute" <doesnotcompute.TakeThisOut@DELETETHISgmail.com> wrote in
  > > message
  > > news:f39a986a7a683acba71f168efc5febb3@localhost.talkaboutmotorcycles
  > > .com...
   > > > Buzby said:
   > > >
   > > > > I want to stuff some more ram <snip>
   > > >
   > > > Baaad idea.
  > >
  > > <sheepish grin>
 >
 > Woolly get a joke like that?

I'm not sure weaver he will or not.

--
Preston.

<a style='text-decoration: underline;' href="http://www.muddystuff.co.uk" target="_blank">http://www.muddystuff.co.uk</a>
Off-road classifieds

'02 MV Senna '96 Tiger '79 Fantic 250
<a style='text-decoration: underline;' href="http://groups.yahoo.com/group/uk_tiger_rides" target="_blank">http://groups.yahoo.com/group/uk_tiger_rides</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Catman

External


Since: Jan 06, 2004
Posts: 1112



(Msg. 8) Posted: Thu Feb 03, 2005 7:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Buzby wrote:

 > I want to stuff some more ram in the pc. However, I'm confused [1].
 >
 > I've got (according to CPU-Z utility) PC800 (400mhz) RDRam - I've had a
 > look round and can't seem to match this up with any of the techno babble
 > on offer - what should I be looking for?
 >

Lozz has probably got the best link, there. You are the only person I know
of that actually bought a PC with RIMM in it Smile
--
Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3
Tyger, Tyger Burning Bright (Remove rust to reply)
Alfa 116 Giulietta 3.0l (Really) Sprint 1.7 75 2.0 TS
Triumph Speed Triple: Black with extra black bits
<a style='text-decoration: underline;' href="http://www.cuore-sportivo.co.uk" target="_blank">www.cuore-sportivo.co.uk</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Buzby

External


Since: Jan 23, 2004
Posts: 238



(Msg. 9) Posted: Thu Feb 03, 2005 8:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

   >> > "Doesnotcompute" <doesnotcompute DeleteThis @DELETETHISgmail.com> wrote in
   >> > message
   >> > news:f39a986a7a683acba71f168efc5febb3@localhost.talkaboutmotorcycles
   >> > .com...
   >> > > Buzby said:
   >> > >
   >> > > > I want to stuff some more ram <snip>
   >> > >
   >> > > Baaad idea.
   >> >
   >> > <sheepish grin>
  >>
  >> Woolly get a joke like that?
 >
 > I'm not sure weaver he will or not.

Oi - piss off baaabaaaraaa!<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Buzby

External


Since: Jan 23, 2004
Posts: 238



(Msg. 10) Posted: Thu Feb 03, 2005 8:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

  >> I want to stuff some more ram in the pc. However, I'm confused [1].
  >>
  >> I've got (according to CPU-Z utility) PC800 (400mhz) RDRam - I've had a
  >> look round and can't seem to match this up with any of the techno babble
  >> on offer - what should I be looking for?
  >>
 >
 > Lozz has probably got the best link, there. You are the only person I
 > know
 > of that actually bought a PC with RIMM in it Smile

*proud*

It's a PC, it's old etc etc.

Mind yew, I might just look at replacing M/B, chip etc etc to bring it up to
a decent spec.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Catman

External


Since: Jan 06, 2004
Posts: 1112



(Msg. 11) Posted: Thu Feb 03, 2005 9:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Buzby wrote:

 >
   >>> I want to stuff some more ram in the pc. However, I'm confused [1].
   >>>
   >>> I've got (according to CPU-Z utility) PC800 (400mhz) RDRam - I've had a
   >>> look round and can't seem to match this up with any of the techno babble
   >>> on offer - what should I be looking for?
   >>>
  >>
  >> Lozz has probably got the best link, there. You are the only person I
  >> know
  >> of that actually bought a PC with RIMM in it Smile
 >
 > *proud*
 >
 > It's a PC, it's old etc etc.

Not only that, but there were so many issues with RIMM when it launched, and
it was so much more expensive than the competition that it had a short
life, even for an IT porduct. (If memory serves)

 > Mind yew, I might just look at replacing M/B, chip etc etc to bring it up
 > to a decent spec.

Given that 512M from ebuyer is gonna set you back nigh on £200 plus VAT and
p+p it would be both cheaper, and give a much greater improvement in
performance to buy a new CPU, Mobo and RAM. you could probably stretch to
a nice new hard disc as well.
--
Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3
Tyger, Tyger Burning Bright (Remove rust to reply)
Alfa 116 Giulietta 3.0l (Really) Sprint 1.7 75 2.0 TS
Triumph Speed Triple: Black with extra black bits
<a style='text-decoration: underline;' href="http://www.cuore-sportivo.co.uk" target="_blank">www.cuore-sportivo.co.uk</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Buzby

External


Since: Jan 23, 2004
Posts: 238



(Msg. 12) Posted: Thu Feb 03, 2005 9:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

   >>>> I want to stuff some more ram in the pc. However, I'm confused [1].
   >>>>
   >>>> I've got (according to CPU-Z utility) PC800 (400mhz) RDRam - I've had a
   >>>> look round and can't seem to match this up with any of the techno
   >>>> babble
   >>>> on offer - what should I be looking for?
   >>>>
   >>>
   >>> Lozz has probably got the best link, there. You are the only person I
   >>> know
   >>> of that actually bought a PC with RIMM in it Smile
  >>
  >> *proud*
  >>
  >> It's a PC, it's old etc etc.
 >
 > Not only that, but there were so many issues with RIMM when it launched,
 > and
 > it was so much more expensive than the competition that it had a short
 > life, even for an IT porduct. (If memory serves)
 >
  >> Mind yew, I might just look at replacing M/B, chip etc etc to bring it up
  >> to a decent spec.
 >
 > Given that 512M from ebuyer is gonna set you back nigh on £200 plus VAT
 > and
 > p+p it would be both cheaper, and give a much greater improvement in
 > performance to buy a new CPU, Mobo and RAM. you could probably stretch to
 > a nice new hard disc as well.

Any recommendations as to chip - mobo- ram combinations? Don't want to spend
a fortune - but summat I could edit videos on would be good , although not
essential, as mine usually conks out somewhere along the line<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Catman

External


Since: Jan 06, 2004
Posts: 1112



(Msg. 13) Posted: Thu Feb 03, 2005 9:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Buzby wrote:

<snip>
  >>
  >> Given that 512M from ebuyer is gonna set you back nigh on £200 plus VAT
  >> and
  >> p+p it would be both cheaper, and give a much greater improvement in
  >> performance to buy a new CPU, Mobo and RAM. you could probably stretch
  >> to a nice new hard disc as well.
 >
 > Any recommendations as to chip - mobo- ram combinations? Don't want to
 > spend a fortune - but summat I could edit videos on would be good ,
 > although not essential, as mine usually conks out somewhere along the line

<can of worms mode = open>

Athlon XP 2500 £52
Abit NF7 £35
Viking 512M DDR400 £41

Add VAT and a disk / graphics card should you desire. There are many other
options, but that should work AOK

--
Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3
Tyger, Tyger Burning Bright (Remove rust to reply)
Alfa 116 Giulietta 3.0l (Really) Sprint 1.7 75 2.0 TS
Triumph Speed Triple: Black with extra black bits
<a style='text-decoration: underline;' href="http://www.cuore-sportivo.co.uk" target="_blank">www.cuore-sportivo.co.uk</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Buzby

External


Since: Jan 23, 2004
Posts: 238



(Msg. 14) Posted: Thu Feb 03, 2005 10:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

   >>> Given that 512M from ebuyer is gonna set you back nigh on £200 plus VAT
   >>> and
   >>> p+p it would be both cheaper, and give a much greater improvement in
   >>> performance to buy a new CPU, Mobo and RAM. you could probably stretch
   >>> to a nice new hard disc as well.
  >>
  >> Any recommendations as to chip - mobo- ram combinations? Don't want to
  >> spend a fortune - but summat I could edit videos on would be good ,
  >> although not essential, as mine usually conks out somewhere along the
  >> line
 >
 > <can of worms mode = open>
 >
 > Athlon XP 2500 £52
 > Abit NF7 £35
 > Viking 512M DDR400 £41
 >
 > Add VAT and a disk / graphics card should you desire. There are many
 > other
 > options, but that should work AOK

Thanks for that - much appreciated - I'll go have a root around!<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Catman

External


Since: Jan 06, 2004
Posts: 1112



(Msg. 15) Posted: Thu Feb 03, 2005 11:40 am
Post subject: Re: FOAK: Ram [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Buzby wrote:

   >>>> Given that 512M from ebuyer is gonna set you back nigh on £200 plus VAT
   >>>> and
   >>>> p+p it would be both cheaper, and give a much greater improvement in
   >>>> performance to buy a new CPU, Mobo and RAM. you could probably stretch
   >>>> to a nice new hard disc as well.
   >>>
   >>> Any recommendations as to chip - mobo- ram combinations? Don't want to
   >>> spend a fortune - but summat I could edit videos on would be good ,
   >>> although not essential, as mine usually conks out somewhere along the
   >>> line
  >>
  >> <can of worms mode = open>
  >>
  >> Athlon XP 2500 £52
  >> Abit NF7 £35
  >> Viking 512M DDR400 £41
  >>
  >> Add VAT and a disk / graphics card should you desire. There are many
  >> other
  >> options, but that should work AOK
 >
 > Thanks for that - much appreciated - I'll go have a root around!

np. That was from <a style='text-decoration: underline;' href="http://www.ebuyer.co.uk" target="_blank">www.ebuyer.co.uk</a> whom I use a lot.
--
Catman MIB#14 SKoGA#6 TEAR#4 BOTAFOF#38 Apostle#21 COSOC#3
Tyger, Tyger Burning Bright (Remove rust to reply)
Alfa 116 Giulietta 3.0l (Really) Sprint 1.7 75 2.0 TS
Triumph Speed Triple: Black with extra black bits
<a style='text-decoration: underline;' href="http://www.cuore-sportivo.co.uk" target="_blank">www.cuore-sportivo.co.uk</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: FOAK: Ram 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
One for the FOAK - Oh Fount of All Knowledge, Please could someone tell me (well it's a colleague who asked) categorically, how Mars make Maltesers. My best guess, is that the malted stuff is made into balls, which are then dipped in chocolate and dropped down a chimney....

FOAK Sat Nav - Best i aske here before i waste my hard earned. I want a GPS system for the car because i get lost easily and her indoors cant read either maps or signs. What should i buy? Dont want a huge monster unit but something i can for example sit on the centr...

FOAK: Architects - Font Of All Knowledge question regarding architects: Much of my work is specified by architects. Where can I find a list of the buggers? -- cane@work

FOAK: 3D Modelling. - I need to build a model out of flat sheets of acrylic. Each panel would be profiled so that when stacked they produce a shape. In this case a human form. Does anyone know how to get from a 3D image to a vector format of each slice so we know what to cut...

FOAK - I would like to buy some money - This is one of those wild and fleeting thoughts, but for some time I've thought I'd quite like to own a genuine Emperor Norton Imperial Bond. I understand they're "quite valuable", but I'd like an idea of just how valuable (i.e. is 100 quid qu...
   Motorcycle Magazine (Home) -> UK All times are: Pacific Time (US & Canada) (change)
Goto page 1, 2
Page 1 of 2

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]