05 Ninja has build-up around coolant tube connection

External Since: Oct 09, 2007 Posts: 1

There's a visible, black, rubber tube on right side of bike. Large
diameter tube, like 1 or 2 inches. Around the connection point, where
tube meets metal, there's dried up flaked coolant. Almost as if the
tube isn't on tight enough. But I checked and the darned thing is as
tight as can be.

Any idea what can cause this?

thanks.

c

External Since: Aug 13, 2007 Posts: 37

"c" <barneytoe.DeleteThis@gmail.com> wrote in message
news:1191968681.612463.89180@d55g2000hsg.googlegroups.com...
> There's a visible, black, rubber tube on right side of bike. Large
> diameter tube, like 1 or 2 inches. Around the connection point, where
> tube meets metal, there's dried up flaked coolant. Almost as if the
> tube isn't on tight enough. But I checked and the darned thing is as
> tight as can be.
>
> Any idea what can cause this?
>

Replace the coolant hose. It might be dried out with cracks in it which
allows coolant through, particularly when it's under pressure before the
thermostat opens. You didn't specify if it's the connection to the rad or
to the engine, but when you replace the hose carefully check the metal
fitting the hose fits onto, looking for cracks.

Dave S.